How to Look After a Block Paving Driveway: An Autumn & Winter Maintenance Guide

How to Look After a Block Paving Driveway: An Autumn & Winter Maintenance Guide

8 October 2026

A professionally installed block paving driveway is designed to cope with years of vehicles, foot traffic and British weather.

But that doesn’t mean it should simply be forgotten once it has been laid.

Like any part of your property, a little regular maintenance can help keep a driveway looking its best and allow you to spot small issues before they develop into bigger problems.

Autumn is a particularly good time to give your driveway some attention. Falling leaves, wetter weather, mud, algae and eventually frost can all change the way the surface looks and performs.

So, what should you actually be doing – and which common driveway cleaning habits could potentially do more harm than good?

Here’s our practical guide to looking after a block paved driveway through autumn, winter and beyond.

1. Keep Fallen Leaves and Debris Under Control

One of the simplest things you can do is also one of the most useful: sweep your driveway regularly.

During autumn, leaves can quickly accumulate around kerbs, drainage channels and less frequently used areas of the driveway.

When leaves and other organic material are allowed to sit on paving for long periods, they break down and create dirt and staining. Damp organic material can also encourage moss and algae in shaded areas.

Regular sweeping helps keep the surface clear and makes it much easier to see the condition of the paving underneath.

Brett Landscaping’s paving maintenance advice recommends ongoing cleaning and maintenance to preserve the appearance and longevity of paving products.

For most homeowners, that begins with a broom rather than specialist equipment.

2. Keep Drainage Channels Clear

Your driveway drainage cannot work effectively if the route water is supposed to take is blocked by leaves and debris.

During periods of heavy autumn rainfall, take a look at what happens when water lands on your driveway.

Does it flow towards the intended drainage points?

Are channels clear?

Has soil, leaf litter or other debris collected around gratings?

Clearing obvious surface debris is a simple job, but it can make a significant difference.

Drainage is something ALS Landscaping considers from the outset when installing block paving driveways, alongside excavation, sub-base preparation, levels and falls.

We saw exactly why this matters when replacing a 20-year-old block paved driveway in Lincoln.

The old driveway had become prone to flooding, had sunk because of insufficient groundworks and had badly installed drainage that was no longer functioning correctly.

Our team removed the old driveway, corrected the underlying issues and installed new galvanised drainage channels connected correctly to the existing drainage system before completing the new Brett block paving.

Maintenance can’t correct fundamentally poor construction, but keeping a properly designed drainage system clear helps it continue doing the job it was installed to do.

3. Don’t Ignore Moss and Algae

Green growth tends to become more noticeable as conditions get wetter.

Shaded areas are particularly susceptible because they stay damp for longer, especially where a driveway sits alongside walls, planting or overhanging trees.

Aside from affecting the appearance of the paving, algae and similar organic growth can make an outdoor surface more slippery when wet.

The solution doesn’t have to involve attacking the driveway with the strongest chemical cleaner you can find.

Brett’s maintenance guidance recommends appropriate treatment for moss and algae and warns that some cleaning techniques and chemicals can damage paving if used incorrectly.

Always check that a cleaning product is suitable for your particular paving before applying it.

4. Be Careful With Pressure Washing

A pressure washer might seem like the obvious way to restore a dirty driveway.

But more pressure isn’t necessarily better.

Used incorrectly, high-pressure cleaning can remove material from the joints between block pavers and potentially affect the installation.

Brett’s maintenance guidance provides product-specific advice on looking after paving, so it’s worth checking the manufacturer’s recommendations before using high-pressure equipment.

That is particularly relevant with block paving because the jointing material isn’t simply decorative.

It forms part of the paving system.

Brett’s technical support for block paving explains the role of jointing material and the importance of maintaining the joints.

So before automatically reaching for a pressure washer, check the maintenance guidance for the paving installed on your driveway.

5. Check the Jointing Sand

Take a closer look between the blocks.

Are the joints still properly filled, or have some areas lost material?

Jointing sand can be lost over time, particularly following inappropriate or aggressive cleaning.

The material between the blocks plays an important role in a block paving installation, so areas where jointing material has been lost shouldn’t simply be ignored.

This is another reason aggressive cleaning should be approached carefully.

If you remove jointing material every time you clean the driveway and never replace it, you could potentially create another maintenance issue.

6. Deal With Oil Spills Promptly

Cars and driveways inevitably go together, which means oil and other vehicle-related stains can happen.

The best time to deal with a spill is generally before it has had an opportunity to penetrate and spread.

Avoid immediately wiping an oil spill across a larger area of paving. Absorbing as much of the excess as possible first can help limit the affected area.

The exact cleaning method should always be appropriate for the paving product.

Avoid reaching for aggressive chemicals without checking first. Unsuitable cleaning products can alter the colour or appearance of some concrete paving.

If you know the manufacturer and paving product installed on your driveway, consult its current maintenance instructions before treating a stubborn stain.

7. Remove Weeds Before They Become Established

A common misconception is that weeds appearing between block paving must be growing upwards from underneath the driveway.

Often, they aren’t.

Seeds can be blown onto the driveway and settle in material that accumulates within the joints. Given enough moisture and time, they can germinate there.

Regular sweeping helps reduce the organic material available for seeds to establish in.

If weeds do appear, dealing with them while they are small is generally easier than waiting until they have spread across a larger area.

Take care with any weed treatment used near lawns, borders or other planting and always follow the manufacturer’s instructions.

8. Watch for Changes in the Surface

Cleaning your driveway is also an opportunity to inspect it.

Look beyond dirt and leaves and consider whether the driveway itself has changed.

Are any blocks sitting lower than they used to?

Have wheel ruts started appearing?

Is one area becoming uneven?

Has a puddle appeared somewhere that previously drained correctly?

These can be signs that something more significant is happening underneath the surface.

As we explained in our previous guide to why driveways sink, problems such as rutting and localised depressions can indicate issues with the construction beneath the paving rather than simply the paving itself.

ALS has encountered this first-hand on real projects.

Our Lincoln sinking-driveway replacement involved a driveway where insufficient original groundworks had eventually resulted in sinking and rutting.

If the levels of your driveway are visibly changing, cleaning it won’t solve the underlying problem.

9. Check Edges, Kerbs and Manhole Covers

Not every warning sign appears in the middle of the driveway.

Look around the perimeter too.

Are the edge restraints still secure?

Have blocks started spreading?

Are kerbs moving?

Are inspection covers sitting at the correct level relative to the surrounding paving?

We’ve seen what poor installation around these details can look like.

When ALS completed two neighbouring block paving driveways in Lincoln, one of the existing driveways had been badly laid and included sunken manhole covers.

Our team removed the old installation, excavated the driveways and rebuilt them with properly prepared and compacted sub-bases, correct levels, falls, retaining edges, kerbs and drainage.

Small details matter because the driveway needs to function as one complete system.

10. Take Care When Ice Arrives

When temperatures fall, a slippery driveway naturally becomes a concern.

However, don’t assume that any de-icing product is automatically suitable for your paving.

Different paving manufacturers and product types can have different maintenance requirements.

That is why product-specific guidance matters.

If you know which paving has been installed, check the manufacturer’s current care instructions before applying de-icer, sealant, specialist cleaner or another treatment.

If you have an ALS-installed Brett driveway, the Brett Landscaping maintenance guidance is a sensible place to start.

Should You Seal a Block Paving Driveway?

This is another area where there isn’t a universal answer.

Sealants are available for paving and may be appropriate in some circumstances, but they shouldn’t be treated as an automatic requirement.

The suitability of a sealant depends on the paving product, its condition and the finish you are trying to achieve.

It can also affect the appearance of the paving and potentially influence future maintenance.

If you’re considering sealing a driveway, check the recommendations for the specific paving product rather than relying on generic advice.

What Maintenance Can’t Fix

There is an important distinction between maintenance and repair.

Routine care can help with:

  • Leaves and surface debris
  • General dirt
  • Minor staining
  • Weeds
  • Moss and algae
  • Keeping drainage channels clear
  • Maintaining jointing material

It cannot compensate for a driveway that was fundamentally constructed incorrectly.

If a driveway is sinking, spreading, developing deep wheel ruts or repeatedly flooding because the underlying installation is inadequate, cleaning and maintenance won’t correct the cause.

That is when it’s worth asking an experienced driveway installer to assess what is happening beneath the surface.

A Good Driveway Shouldn’t Need Constant Attention

One of the benefits of a properly installed block paving driveway is that maintenance should be manageable.

Regular sweeping, sensible cleaning, keeping drainage clear and dealing with stains or vegetation before they become established can go a long way towards keeping the driveway looking smart.

More importantly, occasionally inspecting the surface means you’re more likely to notice if something changes.

At ALS Landscaping, we’ve been designing and installing driveways in Lincoln and across Lincolnshire for more than 20 years.

As experienced block paving driveway installers, we understand that the long-term performance of a driveway depends on much more than how the surface looks on the day it’s finished.

If your existing driveway is beginning to show signs of deterioration, or you’re considering replacing it with a professionally installed block paved driveway, contact ALS Landscaping to discuss your project.

FAQs

1. How often should I clean my block paving driveway?

There is no fixed schedule because it depends on the driveway’s surroundings and how quickly dirt, leaves and organic material accumulate. Regular sweeping is a good starting point, with additional cleaning when needed. Autumn is particularly important because fallen leaves and damp debris can quickly build up.

2. Can I pressure wash a block paving driveway?

Check the paving manufacturer’s instructions before using a pressure washer. High-pressure cleaning can remove jointing material and may damage some paving or installations if used incorrectly. If you do clean block paving mechanically, make sure you understand the manufacturer’s recommendations and check whether jointing material needs to be replaced afterwards.

3. Why is the sand disappearing between my block paving?

Jointing material can be lost through weathering and cleaning, particularly if aggressive methods are used. The sand between block pavers forms part of the installation rather than simply filling a cosmetic gap, so lost jointing material shouldn’t be ignored.